Select from the following product lines:

Volvo VT-880 Accessories

Volvo VT-880 Accessories

  1. Visor Trim The VT-880 visor strips are made of 18 Gauge 304 #8 Mirror Finish Stainless and provides a less expensive alternative to reduce sun glare than replacing the whole visor. The visor strip mounts easily with 3M two way tape and a couple of screws.
  2. Cab Trim The VT-880 Cab Trim along with the visor and bunk trim highlight the upper recessed portion of the cab. These pieces are easily installed and sold as a complete kit or individually.
  3. Bunk Trim The VT-880 Bunk Trim along with the visor and cab trim highlight the upper recessed portion of the cab. These pieces are easily installed and sold as a complete kit or individually.
  4. Upper Bunk Extender The VT-880 Upper Bunk Extenders accent the rear of the bunk and deflects wind from the trailer.
    Lower Extender also available.
  5. Fender Trim The VT-880 Inner and Outer Fender Trim protect against road debris and are made of 20 Gauge 304 #8 Mirror Finish Stainless. Sold in Pairs.
  6. Bumper Light Bar The VT-880 Bumper Light Bar comes with 9 Millennium M3 LED Lights.
    Lighting Options: Blank, Millennium or 2” Round light cutouts.
  7. Bumper Grill Inserts The VT-880 Bumper Grill Inserts match the grill bars on the hood. They fill in the open area in the bumper. Sold In Pairs. Easily Installed.
  8. 2 Piece Cab Light Bars The VT-880 Cab Light Bars come standard with 4 Millennium light hole cutouts. Our Light Bars are a standard 4” wide and are made of 18 Gauge 304 #8 Mirror Finish Stainless.
    Lighting Options: Blank, Millennium or 2” Round 
    Lights Not Included, Sold in Pairs.
  9. Bunk Light Bars The VT-880 Bunk Light Bars come standard with 5 Millennium light hole cutouts and a hinged fuel door. Our Light Bars are a standard 4” wide and are made of 18 Gauge 304 #8 Mirror Finish Stainless.
    Lighting Options: Blank, Millennium or 2” Round
    Lights Not Included, Sold in Pairs.
  10. Cowl Extensions The VT-880 Cowl Extensions compliment the cab and bunk lights bars and add a classic appearance.
    Lighting Options: Blank, Millennium or 2” Round.  Sold in Pairs.
  11. Battery Box Lids The VT-880 Replacement Battery Box Lids are made of 14 Gauge 304 #8 Mirror Finish Stainless.
    Additional Options: Our Shield Step Plates prevent scratching and provide a grip to step on. These step plates range in size from 4”x18” to 6”x24”. Sold individually or as a kit.
  12. Fuel Tank Wraps Our Fuel Tank wraps eliminate the need to polish. We do them properly to ensure no corrosion between the fuel tank and the stainless wrap. We use 18 Gauge 304 #8 Mirror Finish Stainless to wrap our tanks.
    Additional Options: ¾ Wrap with Stainless Ends, ¾ Wrap with Vinyl Ends (100’s of colors Available), Stainless Straps for Covers.
  13. Muffler Shields We custom make muffler shields to replace the factory shields.
     Additional Options: Laser cut any name into the shields.
  14. Fenders Fender Options: W.T.I Style Fenders, Nu-Line Stainless Fenders and Fleet Engineer Plastic and Stainless Fenders. Call for complete pricing and options. Custom Made Aluminum Fenders also available.
  15. Custom Fender Mounting Kits We make a custom fender mounting kit for the VT-880 that mounts to the bottom of the fender and crosses underneath the frame and drive line. This kit is made of stainless tubing and will not rust. We complete the kit with mirror finish bracket covers.
  16. Junction Box and Deck Plate Our Junction Boxes are made of 16 Gauge 304 #8 Mirror Finish Stainless.
    Additional Options: with or without light cutouts, quick disconnect hardware, ABS Plug cutout also available.
    Deck Plates are made from 14 Gauge 304 #8 Mirror Finish Stainless or 1/8th smooth or Checker Plate Aluminum.
    Additional Options: We can keep the deck plates tucked inside the frame or wrap it over the sides. Mounting rails provided with deck plate. Complete wraps also available.
    Rear Deck Plates are kept tucked inside of the frame rails and have a bend to follow the contour of the frame.
  17. Rear Frame Covers Rear Frame Covers hide the open frame in the back.
    Additional Options: Standard Cover with no sides or a Customized Cover With welded sides and/or air line openings.
  18. Rear T Light Bars Our Rear T Light Bars are made from 14 Gauge 304 #8 Mirror Finish Stainless for strength and durability. All of our T Bars and Rear Centre Panels are fully enclosed with removable back panels to protect lights and wiring.
    Additional Options: Short or Tall Center Section, Oblong or Round Light Cutouts, Custom Light Options available, Lights not included.
  19. Stainless Mud Flap Weights Our mud flap weights are the heaviest on the market and are made of 14 Gauge 304 #8 Mirror Finish Stainless and have a return bend on the bottom to add strength and durability.
    Additional Options: Available in sizes from 12 – 24 inches long. Sold in pairs and comes with mounting hardware.
 
Your Shield accessorized truck may distract others. Operate your rig with care!